Grease Control Pump
Peristaltic Pump for use with Grease Control Liquid
A simple to install, peristaltic pump for injecting controlled dosages of Grease Control Liquid, via drain lines, to the grease trap.
Contains an easily operated timer and trouble free, automatic dosage control system.
Mains powered for convenience.
PRODUCT MENU
How to Use
How to Use
- A simple to install, peristaltic pump for injecting controlled dosages of Grease Control Liquid, via drain lines, to the Grease Trap.
- Contains an easily operated timer and trouble free, automatic dosage control system.
- Supplied with full instructions.
Using with Grease Control Liquid
- For best results, apply 2 hours after the end of a working day
GREASE TRAPS
Application rates vary with the size of the Grease Trap:| Size of Grease Trap (cubic metres) | Dosage (ml) |
| 1 | 300 |
| 1-5 | 500 |
| >5 | 1000 |
SLOW MOVING DRAINS
Smaller operations- Pre-treat for 3 days at 70ml per day
- After pre-treat, apply 70ml weekly
- Pre-treat for 7 days at 200ml per day
- After pre-treat, apply 200ml weekly
ONGOING DRAIN TREATMENT
Smaller operations- Apply 70ml weekly
- Dilute 150ml in 5−8 litres of water and apply weekly − sufficient for 6−8 drains
Pack sizes
Peristaltic pump -
mains powered
- Order code: GC-PMP-1M
- Units per case: Sold individually
Specifications
- Single shot dose trigger by pulse from water meter (not supplied).
- Dose setting in ml from 0 to 10.0ml.
- Pump prime feature.
- Pump run count saved to permanent memory every 10 cycles.
Where to Buy
Our products are available to purchase from a variety of sources, or please contact us today for a quote!
